| | T H E R M O F O R M I N G |
Technics
:
Here we make a distinction between vacuumforming
and pressureforming but with both technics a
thermoplastic piece of plastic is heated and deformed.
With the process of vacuumforming, the sheet of plastic is clamed
into position, heated and vacuum-sucked three-dimensionally around
the mould. When the product has cooled down it is removed from
the machine. Final processing can occur at a later stage.
With the process of pressureforming, the product is being deformed by pressure instead of vacuum.
CLICK ON THUMBNAILS TO ENLARGE
Available machines for thermoforming:
6 Geiss vacuümvormmachines up to 2500 x 1650 mm
CLICK ON THUMBNAILS TO ENLARGE
Finishing :
A quality product demands a good final processing.
Important is the Cnc-machinery that mainly is used for finishing
thermoformed pieces.
CLICK ON THUMBNAILS TO ENLARGE
Machines available for finishing:
One CNC-machine with automatic tool changer and a working
surface of
3750 x 2000 x 1000 mm.
One 2D CNC-machine with a working surface of 3100 x 1200 x
450 mm
One Lasercuttingmachine with a working surface of 3140 x 2200
x 1000 mm
One 2D lasercuttingmachine with a working surface of 2600
x 1300 mm
CLICK ON THUMBNAILS TO ENLARGE
|
